AC/ DC Digital Clamp / Tang Ampere / Tang Amper / Ampere meter / Kyoritsu Meters Model : 2009R

AC/ DC Digital Clamp / Tang Ampere / Tang Amper / Ampere meter / Kyoritsu Meters Model : 2009R • CAT.IV Clamp Meter can measure the Voltage and Current in both very low and high power circuits. • Accurate True-RMS reading of AC current or voltage with distorted waveform. • Can measure AC and DC currents up to 2000A. NEW TRUE RMS CAT.IV 600V IEC61010 Ø 55 MAX AC/ DC2000A ACV DCV © Hz Continuity OUTPUT PEAK 10ms AC A 400.0/ 2000A ± 1.3% rdg± 3dgt ( 0~ 400.0A, 150~ 1700A) ( 45~ 66Hz) ± 2.0% rdg± 5dgt ( 0~ 400.0A, 150~ 1700A) ( 20Hz~ 1kHz) ± 2.3% rdg± 3dgt ( 1701~ 2000A) ( 45~ 66Hz) DC A 400.0/ 2000A± 1.3% rdg± 2dgt AC V 40.00/ 400.0/ 750V ± 1.0% rdg± 3dgt ( 45~ 66Hz) ± 1.5% rdg± 5dgt ( 20Hz~ 1kHz) DC V 40.00/ 400.0/ 1000V± 1.0% rdg± 2dgt © 400.0/ 4000© | ± 1.5% rdg± 2dgt ( Electronic protection ( no fuse) up to 600V) Continuity buzzer Buzzer sounds below 20© Hz10.0~ 4000Hz ± 1.5% rdg± 5dgt ( Input sensitivityCurrent: more than 40AVoltage: more than 10V) Output Recorder : DC400mV against AC/ DC400.0A DC200mV against AC/ DC2000A Withstand voltage 6880V AC for 5 seconds Conductor size Ø 55mm max. Applicable standards IEC 61010-1 CAT.IV 600V, CAT.III 1000V Pollution degree 2 IEC 61010-031, IEC 61010-2-032, IEC 61326-1, IEC 61326-2-1 Power Source R6 ( 1.5V) × 2 Dimensions 250( L) × 105( W) × 49( D) mm Weight Approx. 540g ( including batteries) : 7107A ( Test leads) , 8201 ( Output plug) , 9094 ( Carrying case) R6 ( AA) ( 1.5V) × 2, Instruction Manual: Optional 8008 ( Multi-Tran) ( AC only) , 7014 ( Output cord)